Book Online Call Now

Car Diagnostics - Birkenhead


 

A diagnostic check finds out why a warning light has come on or why your car isn’t running as it should. At R&S Services, we use diagnostic equipment that works at main dealer level, combined with hands-on testing, to trace faults to their actual cause on most makes and models, including electric vehicles.

How car diagnostics works

Modern cars are run by a network of computers, called control units, that look after everything from the engine and gearbox to the brakes, airbags, and air con. These computers constantly monitor sensors around the car. When a reading falls outside its normal range, the system stores a fault code and often switches on a warning light.

Reading that code is only the starting point. A code tells us which system has spotted a problem, but rarely which part has failed. A misfire code, for example, could be caused by a spark plug, an ignition coil, a fuel injector, damaged wiring, or a mechanical fault inside the engine. Replacing parts based on the code alone is how drivers end up paying for repairs that don’t fix anything.

What happens during a diagnostic check

  1. We listen first. You tell us what you’ve noticed, when it happens, and whether anything has been done already. These details often point us in the right direction.
  2. We read the fault codes. Our equipment connects to the car and reads codes from every control unit, not only the engine.
  3. We look at live data. We watch what the sensors are reporting while the engine runs, and sometimes on a road test, to see how the car behaves in real time.
  4. We test the suspect parts. This can mean checking wiring and connections, measuring voltages, or physically inspecting components until the cause is confirmed.
  5. We explain what we’ve found. You’ll get a plain-English explanation of the fault and a quote for the repair.

How long does a car diagnostic take?

This is where expectations and reality often differ. Plugging in and reading the codes only takes a few minutes, which is why some people expect diagnosis to be quick and cheap. In practice, the reading is the easy part. The time goes into steps three and four, working out why the code was stored and proving which part is responsible.

A straightforward fault can be found in under an hour. An intermittent problem that only appears now and then, or an electrical fault hidden somewhere in the wiring, can take considerably longer, because it has to be recreated before it can be traced. That investigation is skilled work, and it’s what saves you money by making sure only the right part gets replaced.

Why dealer-level equipment matters

Basic code readers, including the free ones some shops offer, usually only read generic engine codes. Our dealer-level equipment can access the manufacturer-specific information from all of the car’s systems, giving us the same depth of detail a main dealer would see, without dealer prices.

When you bring a warning light or fault to R&S Services, you’re dealing with an RAC Approved garage and Shell Approved Service Station that’s also affiliated with the Institute of the Motor Industry (IMI), and Trading Standards. Those recognised standards sit behind every diagnosis we give, so you can trust the answer as well as the equipment.

Diagnostics FAQs

R&S Services is RAC Approved and a Shell Approved Service Station, and we’re affiliated with the Institute of the Motor Industry (IMI), Trading Standards, and Pagid. These are all respected names that we are proud to be associated with, and they set high standards, so you can book your car, van or motorcycle in with confidence.

To find out more about Diagnostics in Birkenhead, contact us online, or call us directly on 0151 345 4730.

Contact Us Online »

Our Location

Find Us

364 Brook Street
Birkenhead
CH41 4LB
0151 345 4730

Get Directions »

Opening Times

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00
Saturday Closed
Sunday Closed

© R&S Services - 2026